INDUSTRIAL NEWS
Following US
HOT SALES PRODUCTS
Get In Touch
Add：Heli Technological & Economic Zone,Ningguo City, Anhui Province
China 242300
Tel: 0086-563-4111988
Fax:0086-563-4111988
Phone:0086-15856363380
Email: sara.wu@nghexin.com
sarawu_smart@163.com
Importance to treat the gray iron melted by electric induction furnace
/in Castings /by Sara WuThis company is a large state-owned enterprise, the production of many varieties of gray iron castings, the previous use of Cupola melting equipment, the production of gray iron castings have been very stable quality. In order to further implement the national requirements for Energy Conservation and emission reduction, optimize the environment, and achieve high efficiency […]
Points for MELTING SCRAP FOR DUCTILE IRON
/in Castings /by Sara WuIn the traditional production process of ductile iron, about 10% carbon scrap is generally used for the burden. This paper only deals with some problems that should be paid attention to in the process of producing nodular cast iron in an induction furnace after increasing the proportion of carbon scrap used. According to the production […]
Ball Mill balls Sorting And Seperating Machine
/in Grinding media balls /by Sara WuThe sand is separated and filtered by the vibrating sieve, and then the casting is rolled into a high-speed rotating barrel. The separated casting ball mill balls and the gating-risers enter into the vibration sorting mechanism at the same time. The ball and the gating-risers are classified by the principle of vibration conveying. The results […]
HORIZONTAL PARTING HIGH-SPEED SAND-COATED IRON MOLD CASTING PRODUCTION LINE
/in Producing grinding ball process /by Sara WuThe sand-coated iron mold casting technology has been favored by the foundry industry with its unique advantages. ZZXJ-F SERIES HIGH-SPEED SAND-COATED IRON MOULD PRODUCTION LINE is developed by our company. It is controlled by PLC in various operation modes. It is highly automatic. The fastest no-load operation speed is up to 30 seconds per box […]
Key points of foundry technology of coated sand (2)
/in Castings /by Sara WuHeating Temperature 200-300, curing time 30-150s, shot pressure 0.15-0.60 MPA. The sand core with the simple shape and the resin coated sand with good fluidity can select lower shooting pressure, lower heating temperature for thin sand core, longer curing time when the heating temperature is low. The resin used in coated sand is phenolic resin. […]