INDUSTRIAL NEWS
Following US
HOT SALES PRODUCTS
Get In Touch
Add：Heli Technological & Economic Zone,Ningguo City, Anhui Province
China 242300
Tel: 0086-563-4111988
Fax:0086-563-4111988
Phone:0086-15856363380
Email: sara.wu@nghexin.com
sarawu_smart@163.com
KEY POINTS IN SOLIDIFICATION PROCESS OF GRAY CAST IRON AND NODULAR CAST IRON (4)
/in Castings /by Sara WuMorphology of primary AUSTENITE DENDRITE The Crystal Lattice of austenite is face-centered cubic. When the AUSTENITE is nucleated and grown directly from the liquid iron, the AUSTENITE is stable only when the surface energy is minimum and octahedral crystal is formed. Then, because the concentration gradient of solute in the liquid iron at the edge […]
KEY POINTS IN SOLIDIFICATION PROCESS OF GRAY CAST IRON AND NODULAR CAST IRON (3)
/in Castings /by Sara WuSecond. Primary AUSTENITE DENDRITE IN CAST IRON Due to the mechanical properties, Gray cast iron is usually hypoeutectic, and there will be primary austenite dendrite in solidification structure. Under the condition of special properties of cast iron (such as high thermal conductivity and good shock absorption), gray cast iron with near Eutectic or hypereutectic composition […]
key points in solidification process of gray cast iron and nodular cast iron (2)
/in Castings /by Sara Wu2. UNIDIRECTIONAL NUCLEATION In the solidification process of the metal-nonmetal system, the nonmetallic substance can be the core of metal solidification, while metal cannot be the core of nonmetallic substance solidification, which is called One-way nucleation.
key points in solidification process of gray cast iron and nodular cast iron
/in Castings /by Sara WuThe final properties of iron castings are mainly determined by the structure formed during solidification. For example, the thermal properties of gray iron are affected by the shape, size, and quantity of graphite in its structure. The mechanical properties depend on the number of primary Austenite Dendrites, the morphology of graphite and the size of […]
Industrial process analysis and control of wear-resistant Bainite Steel Ball
/in Grinding media balls /by Sara WuThe grinding ball is the easy-consumption part of the ball mill. The high-quality grinding ball can reduce the overall production cost, improve the overall economic efficiency, reduce the number of downtimes, improve the utilization of ball mill, reduce labor costs. MN-B alloy bainite steel ball has the characteristics of low cost, high strength, and excellent […]