A.1 Under the following normal operating conditions, the ball broken rate and wear rate of the ball mill running for 2000h and 3000h are shown in Table A. 1.
7.1 The ball shall be inspected by the quality inspection department of the manufacturer. 7.2 Inspection classification: inspection is divided into factory inspection and type inspection. 7.3 The inspection items are diameter deviation (1), shape deviation(5.2), chemical composition (5.3), surface hardness (5.4.1), appearance quality (5.7.1,5.7.2).
6.1 For the provisions of 5.1, 5.2 and 5.7.2, the measuring instrument with a precision not less than 0.1mm shall be used for the measurement, and the parts where surface defects may cause measurement errors shall be avoided during the measurement.
5.1 The deviate diameter of the casting grinding balls should be accord to the requirements of the Table 1. 5.2 The shape deviation of the cast grinding ball shall be less than or equal to the diameter deviation of the cast grinding ball of the same size
This standard specifies the terms and definitions, product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of cast chromium alloy grinding balls for the building materials industry. This standard is applicable to chromium alloy cast grinding balls (hereinafter referred to as cast balls) used in building materials industry, and other cast […]
This standard was revised based on JC/T 533 —1994. This standard shall replace JC/T 533-1994 since the date of the implementation.
HOT SALES PRODUCTS
Get In Touch
Add：Heli Technological & Economic Zone,Ningguo City, Anhui Province